Features

Design benefits

warmth

150 g/m² quilted filling (false feathers). Recycled fleece lining.

waterproof

10,000 mm-rated coating, 100% taped seams. Hood that can be worn with a helmet.

limits snow entering

Cuffs with thumb holes, snow skirt, face protection flap.

robustness

Abrasion resistant components, reinforced elbows and sides.

Design details

Stops snow from getting inside - generally

This kids’ snowboard jacket (or kids’ ski jacket, that works too) is designed to stop snow getting inside: _ on the back: snow skirt + longline cut, _ at the cuffs (extremely exposed area): long sleeves + cuffs with thumb loops to stop snow from entering, _ at the neck: collar with a high gusset / hood with rip-tab to keep it rolled in high position and protect the neck. The hood can also be worn over a helmet.

Stops snow from getting inside - focus on the very sensitive wrist area

This jacket has been developed and tested with the MI 500 JR PROTECT snowboard mittens which go under the jacket so that kids can easily pass the mittens through the sleeve on their own (from 8 years upwards - at 6 years old it's still complicated). Then there are a host of features to keep the snow out 1. jacket sleeve with thumb loop to prevent the sleeve riding up, 2. the mitten reaches high up the wrist , 3. the jacket sleeve then covers everything.

Warmth

For warmth, this jacket has 2 different fillings to perfectly meet the need for heat: _ 150 g/m² for the body, with a fleece lining, _ 100 g/m² on the sleeves.

Waterproofing

As well as the waterproof fabric, we enhance the waterproofing of our kids' snowboard jackets, or our kids’ ski jackets, with taped seams. These are heat-bonded waterproof strips placed on the seams inside the clothing to make it perfectly watertight. On this SNB JKT 500 jacket, 100% seams are taped.

5 pockets

This Decathlon kids’ snowboard jacket is designed for regular to intensive snowboarding, so it has all the pockets required: _ 2 side pockets closed with a zip, _ 1 external chest pocket closed with a zip, _ 1 interior mesh pocket for a buff, goggles, etc _ 1 ski pass pocket on the left sleeve closed with a zip.

Hood rolled under the helmet

When snowboarding, snow can get in the jacket during a fall. To limit this unpleasant experience, the collar and hood were designed together. So that the hood can be used as a scarf and keep the snow out, fold the hood in 4 and velcro it so that it stays up and fills the gap under the helmet. The collar must be closed normally, up to the top to keep everything tight.

Hood over the helmet

The hood of this jacket is designed to fit over a helmet, in case of strong winds, heavy snowfall, etc. In this position, open the collar of the jacket by about 10 cm, pull the hood over the helmet and simply close the collar with the gusset (rip-tab closure). The gusset creates a well-protected area for the mouth and nose.

How should you dress your kids to ensure they don't get cold on the slopes?

To make sure you stay warm and dry, we recommend using the 3-technical-layer rule: - Layer 1 or a second skin, to stay dry. - Layer 2 or an insulating layer, to keep the heat in. - Layer 3 or a protective layer to protect against the elements.

How can I be sure about the durability of my jacket?

Our snowboard jackets are guaranteed for 5 years. We offer repairs locally if your jacket is damaged. Contact us on our website to find out more about how to get your product repaired. We take particular care in choosing all the elements and assembly processes that make up our ski and snowboard jackets so they are as durable as possible.

Water often gets in through the seams. Does my jacket have taped seams?

In addition to the waterproof fabric, we reinforce the waterproofing of the jacket with taped seams. These are heat-bonded waterproof strips placed on the seams inside the clothing to make it perfectly watertight. This product has 100% taped seams.

How to wash the jacket?

To optimise your jacket’s performance and durability, we advise the following: * Machine wash at 30°, synthetic programme. * Turn the product inside out. * Add a small amount of detergent. No softener. * We recommend you wring it by hand. * Dry on a hanger in a warm, well-ventilated place. Do not dry clean. Do not place on a radiator.You can restore the water resistance of the outer fabric using a fabric waterproofing spray. Read the care label.

What is the water repellent feature of my jacket for?

The water-repellent feature makes water run off the fabric without seeping in thanks to a treatment applied to its outer surface. The fabric does not soak up water and stays light and warm. This treatment must be renewed during the life of the product, after 2 to 3 washes on average, using products available in our stores. All the waterproof jackets that we design for snowboarders are water repellent.

How will my jacket keep me warm?

To keep the kids warm, we use wadding insulation. Wadding is a synthetic component made from polyester which stores more or less air, depending on the length of the fibres. Wadding can be standard, hi-tech or silicone-coated, each with different properties (warmth, low weight, elasticity, etc.)

How do I look after my product?

To optimise your product’s performance and durability, we advise the following: Machine wash separately at 30°C. Synthetic cycle. Turn the product inside out. Use a small amount of detergent. No softener. Wring by hand. Dry on a hanger in a warm, well-ventilated place. Do not dry clean. Do not place on a radiator.You can restore the water resistance of the outer fabric using a fabric waterproofing spray.

Repairs

This product is repairable.We commit to repairing your product free of charge for the duration of the warranty. Whatever it is, fixings, seams, zips, etc. This service is offered in your usual store. However, if we can't repair your product (production defect), we will exchange it or reimburse you.

How does my product warranty work?

This product is guaranteed for 5 years from the date shown on the sales receipt. A product covered by warranty will be repaired or exchanged free of charge. The warranty covers product defects , excluding those resulting from normal wear and tear and improper use. Find all the warranty details on our website: https://www.wedze.fr/quest-ce-que-la-garantie-textile-5-ans

frequency	regular
fit	loose
reversible	not reversible
zip type	full zip
snow skirt	with snow skirt
waterproof	waterproof
hood	with hood
pocket	inside pocket, ski pass pocket/sleeve, zip closed pocket, with pocket, flask pocket
main material	polyester
style	printed
ventilation system	without ventilation
mm H2O (Schmerbers)	10,000 mm
windproof	windproof
type of length	mid-long
season	winter
sleeves length	long sleeves
modular	not modular
reflective	without reflective zones
type of waterproofing	coating
RECCO system	without integrated RECCO system
thumb pass	with thumb pass
type of hood	helmet-compatible hood
reinforced area	elbow reinforcement

Raw material	91.728%
Manufacturing	1.353%
Packaging	0.535%
Distribution	2.601%
Use	2.416%
End of life	1.366%

Kids’ Snowboard Jacket - SNB 500 Kid - Graphite Blue

Highlights

Highlights

Highlights

Features

Design benefits

Design details

Specifications

Details

Composition

Usage & care

Care instructions

Storage

Cleaning

Environmental impact

Carbon footprint